Cell phone or mobile towers are used for transferring the mobile phone signals. These transmitters basically relay the signals in tower to another so that it can reach the BTS manufacturer uk intended individual. Most of us, however, don’t realize how a mobile phone tower works or how it functions. Here are some of the core issues.
Cell phone basics
The mobile tower technology is just advanced radio technology. The main intent behind a mobile phone tower involves picking up a cell phone signal inside a certain radius and then relaying it to other towers via radio swells. This goes on before the intended individual can be found and the two phones are linked for a passing fancy radio frequency. Allow communication, the voice data between two communicators is encoded by radio swells and then passed between the towers so your users can talk among themselves. When the unknown caller or individual moves away from backyard of a particular tower, the signal is automatically switched over to the tower closest thing to the person. This gives uninterrupted communication. All mobile phone carriers make use of the same grid to conduct their calls, though every carrier may not have its equipment on each tower. This explains why mobile phone service contract deals differ so widely.
Cell Phone Tower development
At the very beginning, mobile phone towers used very fixed number of frequencies for carrying voice data. Whenever someone called, two separate frequencies were used. One was for the incoming signal and the other for the outgoing one. Thereafter, governments across the world permitted over 200 frequencies for mobile phones with some extra frequencies for transferring data. This went on well for many years. However, as cell phones gained popularity, service providers realized that there weren’t enough frequencies for everybody to talk simultaneously. For dealing with the problem, the voice data was digitized. Today, mobile phones digitize voice data to digital signals and transmit them across towers on various radio frequencies. The other mobile phone is sent the information for picking up the signal. It assembles the data on the opposite end. This way the communication can be used efficiently.
Today, when we make a call via a mobile phone, a radio signal is dispatched to the antenna of the tower and lets it know that a phone intends to establish communication with another phone. The signal is routed via fiber optic cables to a wireless point. It is here that the signal is again routed to a backhaul which enables the data in traveling between the two. Many a times, the mobile towers are linked with landlines, in which a signal is sent via the cables. At other times, an electric microwave antenna broadcasts the signal through air. The wireless local loop technology and the short-range technology are also often used during problems.
Each passing day is watching newer Cell Phone Tower technologies being developed. May be the day isn’t far when cell phones would be able to establish communications sans any tower.